Aftermarket Western Multiplex Vee Blade Industrial Joystick control with 4-Pin connector. This control comes with the correct plug, no adapter required, just Plug-n-Plow. This is the common 4 pin white plug used by Western on the Vee Blade multiplex controllers. In this listing you are just buying the control with NO MOUNTING BRACKET. This control has features not offered on the OEM controls. The OEM Western Joystick part # is 85250. This Joystick can also replace the OEM Western Handheld part # 96500.
VERY IMPORTANT, PLEASE NOTE: This joystick is NOT identical to the OEM Joystick. The joystick we are selling is in the photos on this listing and our joystick is much bigger then the OEM joystick. See the measurements below and be aware that our joystick would require some way to mount it, that we do not offer (it has the same mounting holes as the OEM BOSS joysticks). If you have any questions about this product, please contact us about it. Thanks.
906 Engineering also offers an equivalent Vee Blade multiplex handheld controller, right here.
Size of the box enclosure: 3 1/2″ wide X 4″ deep X 3 1/2″ tall (The handle is 3″ tall)
Check out the following instruction sheets to see all the features included on this control.
Instruction Sheets: 906 MP-JS-VB , 906 MP-JS-U-SET
-Control plugs directly into your existing harness, NO adapter required, just Plug-N-Plow
-Please make sure the connector matches your connector before ordering
-4 way (for Straight Blade Controllers) or 10 way (for Vee & Wing Blades) operation
-U-SET feature allows the user to change some of the controls features.
-Automatic Shut-off when not in use, approximately 22 minutes
-The plow blade will coast to a soft stop (left or right), results in smoother operation and decreased wear on the plows hydraulic system
-Express Up/Down Feature (Double Tap)
-On/Off switch can be used as an Emergency Stop when required
-Illuminated LED on control for night time plowing
-All control functions will time out (shut-off) after a period of time. This helps reduce wear on the pump motor and prevent unnecessary battery drain. Time outs vary depending on which plow the control will be used for.
-Flexible Straight Cord
-Use for both Left or Right Hand
-No Mounting Bracket Included. Although, this control does have a mounting plate on the bottom of the control that accepts four screws (also, NOT Included).
-Instructions come with each control
-Designed and Manufactured in the U.S.A.
DISCLAIMER: The use of the names of manufacturers is for the assistance of our customers in identifying replacement parts which we manufacture or which may be manufactured for 906 Engineering Corp. It is not implied that any part listed is the product of these manufacturers.
There are no reviews yet.